MaxTow’s Double Vision™ Series 15 PSI Fuel Pressure Gauge is an electronically driven gauge that includes an electronic fuel pressure sensor which reads and displays fuel pressure levels from 0 to 15 PSI with incredible accuracy. This gauge was specifically designed for those who are running low pressure high pressure injection pumps or those whose vehicles are equipped with carburetors and need accurate fuel pressure readings.
MaxTow’s White Double Vision Gauge Series features a green LED display and an illuminated red needle, which gives you the classic look of an analog gauge, as well as an easy to read green digital numerical readout. The Double Vision Gauge Series outperforms the competition by offering multiple options and added convenience when it comes to monitoring your truck’s most vital functions! This 2-1/16" (52mm) 15 PSI fuel pressure gauge features stepper motor technology which allows for exceptionally smooth needle movement and extremely precise gauge readings. No matter how much your truck is shaking or pulling, the needle is unaffected and delivers the accurate results you’re looking for. Our diesel fuel pressure gauge also features innovative daytime and nighttime modes with three customizable brightness settings for each mode. The three daytime brightness settings (d1, d2, d3) allow you to easily view your gauge readings without being affected by the sunlight, while the three nighttime brightness settings (n1, n2, n3) allow up to a 50% more subtle glow for your gauge while driving during the late hours of the night. Also featured with the nighttime mode is that the illuminated red needle will match the brightness level of the gauge for easier viewing at night! The included brightness recall function will remember the previous brightness setting you had on before powering your vehicle down so you won’t have to reset it every time you turn your vehicle on.
MaxTow’s 15 PSI Electronic Fuel Pressure Sensor features a 1/8-27 NPT threads allowing it to be installed directly to your fuel filter housing or by using an adapter, and the wire harnesses for both power (5ft) and fuel pressure sensor (9ft) connections assure that you’ll have more than enough wire for an easy installation. All gauge mounting hardware and installation instructions come standard with every electronic fuel pressure gauge purchased, as well as a one year limited warranty and free lifetime technical support. Get ready to hit the road and Tow to the Max™!
Dodge Cummins Note: A Snubber Valve is required when installing a 15 PSI Fuel Pressure Gauge into a Dodge Ram Cummins. The Snubber Valve regulates, normalizes and eliminates fuel pressure spikes that are present during the initial ignition and startup on the Dodge Cummins Diesel Engine through the use of a regulator. High pressure fuel system spikes during startup are harmful and may cause early and unexpected failure of electronic fuel pressure sensors and/or sending units for fuel pressure gauges.
GM Duramax Note: If you are installing this gauge to a GM Duramax engine, an aftermarket lift pump is required for this gauge to function properly.
|Range of Reading:||0 - 15 PSI|
|Diameter of Gauge:||2-1/16" or 52mm|
|Depth of Gauge:||1-5/16" or 33mm|
|12-Volt Power Required:||✓|
|Power Wire Harness Length:||5'|
|Sensor Wire Harness Length:||9'|
|Included Parts List:||Power Harness, Sensor Harness, Pressure Sensor, Mounting Hardware, Gauge Visor & Instructions|
|Sensor Thread Size:||1/8-27 NPT|
|Actual Sensor Size:||1-1/4" x 2"|
|Power Harness Gauge Size:||18 Gauge|