HPOP Gauge For Powerstroke | Monitor High Pressure Entering The Oil Pumps
Posted by Matt P. on Jan 05, 2017
- High Pressure Oil Pump Gauges
- Ford 6.0 & 7.3 Powerstroke
- Double Vision™ LED Gauge Display
- 9' Sensor Harness
- Wire to Factory ICP Sensor
- Monitor HPOP From 0 to 4,000 PSI
- Protect the Fuel Injectors
- Avoid Fuel System Failure
Driving a Ford Power Stroke 6.0L or 7.3L? You may want to invest in a MaxTow Double Vision™ High Pressure Oil Pressure Gauge to effectively monitor the high pressure entering the oil pumps in your Ford engine. MaxTow High Pressure Oil Pressure Gauges are electronically driven and read your truck’s HPOP from 0 to 4,000 PSI.
You may be wondering why monitoring the HPOP is so important for your Power Stroke engine. In a Power Stroke, the HPOP is what drives the injectors to supply fuel to the engine. HPOP works by receiving oil from the low pressure oil pump in order to drive the injectors, then the internal computer tells the injectors exactly when to fire. HPOP pressure can be anywhere within 500 to 3,000 PSI. If your truck has a weak or defective HPOP, you could be starving the injectors of fuel which could lead to fuel system failure.
MaxTow Double Vision™ High Pressure Oil Pump Gauges are available with a white or black dial and feature an analog display using an illuminated red needle combined with a green or blue digital LED readout. The 52mm gauge features stepper motor technology that allows for extremely smooth needle movement to keep up with the changing pressures of your truck. Each MaxTow HPOP Gauge includes a 9’ Sensor Harness and 3’ Power Harness that connects to the power source.
Installing a High Pressure Oil Pump Gauge in your Ford 6.0 Powerstroke or 7.3 Powerstroke allows you to get extremely accurate readings to ensure everything is functioning properly. To install, simply connect the included 9’ Gauge Sensor Wires to the factory Injector Control Pressure Sensor (ICP Sensor). If you want to avoid splicing any factory wiring, use the HPOP Gauge Wiring Pigtail Harness. To install the pigtail harness, simply disconnect the ICP Sensor Harness connectors and plug in this pigtail harness and you’re set.
All necessary mounting hardware and Install Instructions come with each gauge in addition to Free Lifetime Tech Support and a One Year Limited Warranty.