Exhaust Gas Temperature Bracket for Version 2 EGT Probes
- Item Number:
- Gauge Type:
- Exhaust Temperature
Delivery By ChristmasCONTIGUOUS US ONLY
Extended Holiday ReturnsACCEPTED UNTIL JANUARY 31ST
Free In-House Support
MaxTow’s Version 2 Exhaust Gas Temperature (EGT) Bracket allows you to easily install our EGT probes in your truck’s exhaust pipe without having to tap into the pipe. This EGT adapter was made specifically for Version 2 MaxTow Exhaust Gas Temperature probes, and is also extremely useful when exhaust pipes are too thin for tapping. Keeping track of exhaust gas temperature levels is important in ensuring that your turbocharger is not overheating. The featured sizes for the bracket range from a minimum of 3-1/8" to a maximum of 5". To install you simply drill a 3/8" hole, insert the EGT probe adapter, and then clamp it. Please make sure to remove the 1/8-27 NPT ferrule fitting in order to thread the probe into the bracket. We recommend installing the EGT probe as close to the turbo flange as possible. Please also note that the bigger the exhaust and the farther it is from the turbo, the cooler the temp readings will be. MaxTow includes a one-year limited warranty, installation instructions and free lifetime tech support with every purchase.
Works with Version 2 EGT Probes with Waterproof Connector Only.