- Transmission Cooler Adapter
- Dodge Ram 6.7 Cummins 68RFE Trans
- Install Temp or Pressure Sensor
- Avoid Cutting Factory Lines
- Made From Billet Aluminum
- (2) 1/8-27 NPT Ports
- (2) Quick Disconnect Fittings
- (1) 1/8-27 NPT Plug
If you want to sidestep cutting into factory lines and adding a T-Fitting for a transmission temperature or pressure sensor, we have an adapter for Ram trucks that’ll do the trick.
This Transmission Cooler Thermal Bypass Sensor Adapter is made specifically for the 2013+ Dodge Ram 6.7 Cummins 68RFE. Add a transmission temperature sensor or a pressure sensor to the hot and cold side of the transmission.
Each Cummins transmission adapter is made out of billet aluminum and has (2) 1/8-27 NPT ports for the sensors, (2) quick disconnect fittings and a 1/8-27 NPT plug. Install it directly to the factory transmission lines, add the sensors and you’re ready to go. It also deletes the trans cooler line thermostat to help protect against transmission failure if the thermostat sticks.
On top of not having to make any major modifications to your Ram truck, you can remove the adapter anytime you want and go back to the factory setup. Just keep in mind that these Cummins adapter kits only work on the 6.7 Cummins with 68RFE transmissions.
We just made it a whole lot easier to install a temp or pressure sensor to your Ram truck. This Cummins transmission adapter is also backed by unrivaled Customer Support and Free Lifetime Tech Support. So if you have any questions about the adapter or the install, reach out to us and we’ll be happy to assist.