00-06 Chevrolet Silverado Duramax MaxTow Custom Gauge Package

MaxTow Custom Gauge Package Features:

MaxTow Double Vision Gauge Series

Available in 2 1/16th Inch (52mm) Black or White Face with Green Through Dial LED Lighting
Double Vision Display Features Both Digital & Analog Gauge Readings
Daytime Dimming Mode with 3 Customizable Settings
Nighttime Dimming Mode with 3 Customizable Settings
Includes All Sensors & Installation Hardware
One Year Limited Warranty & Lifetime Technical Support

00-06 Chevy Silverado Duramax Triple Pillar Pod

Full Size Black, Gray or Tan Triple Pillar Pod
Holds Three 2 1/16th Inch (52mm) Gauges
Crafted from the Highest Quality ABS Plastic Available
Includes Mounting Hardware & Instructions
One Year Limited Warranty & Free Lifetime Technical Support

MaxTow Double Vision Gauge Series:

Daytime and Nighttime Dimming Modes Featured with MaxTow Gauges

This MaxTow Custom Gauge Package allows you to select three truck gauges from MaxTow’s Double Vision™ Gauge Series to install with the included truck specific triple pillar pod. The MaxTow Double Vision Gauge Series offers users with a dual readout display that includes a “quick glance” green LED digital display as well as the classic look of an analog gauge through use of the illuminated red needle. Each gauge features a diameter of 2 1/16 inches (52mm) and out performs the competition by utilizing the combination of electronic sensors and stepper motor technology that allows for extremely smooth needle movement and precise gauge readings. MaxTow Gauges also feature daytime (d1, d2, d3) and nighttime (n1, n2, n3) dimming modes where you can set your preferred brightness level whether you’re driving during the day or the late hours of the night! The included brightness recall function remembers the previous brightness setting you had selected before powering your truck down so you won’t have to worry about resetting it every time you power your truck on! MaxTow includes extended wire harnesses for both power (3ft) and sending unit (9ft) connections to ensure you’ll have more than enough for a complete installation!

Don’t forget to take a moment and check out the available gauges and accessories below to see which are recommended for your truck and engine! Get ready to hit the road and Tow to the Max™!

Note: The Duramax Engine must have an aftermarket lift pump installed for any fuel pressure gauge to function.

Gauge Options for GM Duramax

For Diesel Truck applications MaxTow recommends our 60 PSI Boost Gauge, 1500 Degree Exhaust Gas Temperature Gauge, Transmission Temperature Gauge and 30 PSI Fuel Pressure Gauge.
60 PSI Boost Gauge Electronically Driven Reads Boost from 0-60 PSI Includes 1/8npt Electronic Sensor Includes 9ft of Sensor Wire	1500° Pyrometer EGT Gauge Includes Electronic Exhaust Temperature Probe and Wire Harness Reads Exhaust Temperature from 0-1500 Degrees Fahrenheit	Transmission Temp Gauge Includes Electronic Temperature Sender and Wire Harness Reads Transmission Temperature from 80-260 Degrees Fahrenheit Recommended For Vehicles with Automatic Transmission	30 PSI Fuel Pressure Gauge Includes Electronic 30 PSI Pressure Sender and Wire Harness Reads Fuel Pressure from 0-30 PSI Includes 9ft of Sensor Wire

Other Gauge Options Available:

For gasoline truck applications, MaxTow recommends our 2200 Degree Exhaust Gas Temperature Gauge, 100 PSI Fuel Pressure Gauge, and either a Transmission Temperature Gauge or Water Temperature Gauge.
2200° Exhaust Gas Temperature Gauge Includes Electronic Exhaust Temperature Probe and Wire Harness Reads Exhaust Temperature from 200-2200 Degrees Fahrenheit	100 PSI Fuel Pressure Gauge Includes Electronic 100psi Pressure Sender and Wire Harness Reads Fuel Pressure from 0-100 PSI Includes 9ft of Sensor Wire	Transmission Temperature Gauge Includes Electronic Temperature Sender and Wire Harness Reads Transmission Temperature from 80-260 Degrees Fahrenheit Recommended For Vehicles with Automatic Transmission	Water Temperature Gauge Includes Electronic Temperature Sender and Wire Harness Reads Coolant Temperature from 100-280 Degrees Fahrenheit

Triple Pillar Pod Options:

00-06 Chevy Silverado Duramax Full Size Triple Pillar Gauge Pods

The included black, gray or tan triple pillar pod is specifically designed for the 00-06 Chevrolet Silverado Duramax Truck and is easily mounted to your existing A-pillar giving your Chevy Truck a custom fit and finish. This pod holds three 52mm or 2 1/16th inch gauges, is crafted from the highest quality ABS plastic allowing it to withstand cracking, fading, and warping. MaxTow includes a one year limited warranty and lifetime technical support with every custom gauge package that is purchased.
Fits: 00, 01, 02 ,03, 04, 05, 06 Chevy Full Size Truck, Duramax (Silverado) 1500, 2500, 3500
Fits: 2000, 2001, 2002, 2003, 2004, 2005, 2006 Chevy Full Size Truck, Duramax (Silverado), 1500, 2500HD, 3500HD

1/8-27 NPT Drill & Tap Set Used for Installing EGT Probe, Boost Fittings or Boost Sensor Drill & Tap Exhaust or Intake Manifold to 1/8-27 NPT Includes Size R Drill Bit & 1/8 NPT Tap	MAP Line T-Fitting Adapter Quick & Easy Install of Boost Hose or Sensor into the 3/16” MAP Line Cut the Line, Insert the T-Fitting & Secure with Included Clamps Avoid Drilling & Tapping the Intake Manifold Female 1/8-27 NPT Thread for Fittings/Sensor	Air Intake Heater Boost Plug Adapter Quick & Easy Install of Boost Hose or Sensor to the Air Intake Remove the Restrictive Heater Plug & Thread Adapter in its Place No Drilling or Tapping Required Female 1/8-27 NPT Thread for Fittings/Sensor Fits 2001-2004 GM 6.6L Duramax	Fuel Pressure Adapter for 6.6L Duramax Quick & Easy Install of Fuel Pressure Sensor to Fuel Filter Housing Aftermarket Lift Pump is Required for Fuel Pressure Gauges Replaces the Factory Bleeder Screw Features O-Ring for Leak-Free Seal Female 1/8-27 NPT Thread for Sensor Fits 2001-2017 GM Duramax 6.6L
Fuel Rail Adapter for Chevrolet LS Engines Quick & Easy Install of Fuel Pressure Sensor to Fuel Rail Replaces the Schrader Valve Includes 90° Brass Fitting to Ensure Proper Clearance Female 1/8-27 NPT Thread for Sensor Fits Any GM 5.3L/6.0L LS1, LS2, LS3, LS6 & LT1 Engines	Test Port Adapter for GM Allison 1000 Quick & Easy Install of Temperature Sensor to Transmission Test Port Threads onto Temperature Sensor for Protection from Internal Transmission Parts Includes O-Ring for Leak-Free Seal No Modifications to Transmission Necessary Female 1/8-27 NPT Thread for Sensor Fits 2000-2017 Chevy Silverado/GMC Sierra	Transmission Cooler Line T-Fitting Adapter for GM Allison 1000 Allows Installation of Temperature Sensor to the 5/8” Transmission Cooler Line Includes T-Fitting, Compression Nuts & Cutting Rings for Leak-Free Seal Female 1/8-27 NPT Thread on T-Fitting for Sensor Fits 2000-2013 Chevy Silverado/GMC Sierra	18ft Pressure Sensor Harness Extends the Length of 9’ Harness Included with Gauge to 18’ Commonly Used on Trucks with Aftermarket Lift Pump Installed Plug & Play
Rail Pressure Pigtail Harness Quick & Easy Installation Without Having to Splice or Cut into Factory Wires Connects Directly to Common Rail Pressure Sensor Plug & Play Fits 2001-2016 Duramax LB7, LLY, LBZ, LLM & LML	Expandable Circuit Quick & Easy Way to Power Gauges Directly from the Fuse Panel Used for Constant & Switched 12 Volt Power for Gauges Includes 4 Amp Fuse for Circuit Protection	MaxTow 3 Gauge Power Wire Harness Used to Easily Power All 3 Gauges from 1 Harness that Connects to Power Daisy Chain Feature with Each Connector Plugging into Each Gauge Prevents Wire Clutter in Fuse Panel, Under the Hood or in the Pillar Pod 6-1/2’ of Total Wire

WARNING: Click Here For California's Proposition 65 Information